.
| QUESTION: |
| I have a red brick on my home that was laid in white mortar and white sand. After the mason cleaned the wall there is a white film on the brick. Can this be cleaned? |
| PICTURE: |
|
|
| SOLUTION: |
| Yes, the photo above shows a wall that is partially recleaned with SUREKLEAN Vanatrol by PROSOCO. The dilution rate was 1 part cleaner to 5 parts water. The problem is caused by not thoroughly rinsing the wall after the cleaner is applied. Also it is very important to saturate the wall before applying the cleaner. Do not let cleaner dry on wall as this will cause discoloration as well. Always follow manufacturer's recommendations for safety. |
| SUPPLIERS: |
PROSOCO offers a full line of masonry cleaners. Contact them at www.prosoco.com
or 800-255-4255. |
